55
7.5 First
Aid
The
SSP-25
control circuitry is based on the most advanced microprocessors available today. As is often the
case with personal computers, the
SSP-25
might occasionally exhibit some anomalies. With computers, most
of these difficulties result from AC line surges, sags or outages, spurious inputs, etc.
The
SSP-25
functions in an even harsher environment as it will be connected to cable and satellite video
sources that provide even more direct pathways for unwanted electrical or electronic interference.
If you experience unexpected behavior, or if the
SSP-25
“locks up” and does not respond to control
commands, simply reset it by turning the
rear panel
On/Off
switch Off. Wait about 10 seconds and then turn it
On again. This resets all the internal control circuitry and will undoubtedly solve almost all the problems you
experience. You may need to actually unplug the unit from the wall or remove the AC cord from the rear of the
unit for 15 or 20 seconds to get it to “unlock”.
