Classe Audio SSP-25, Owner'S Manual

Page: 45 / 56

45
Please turn to the next page for the worksheet and to continue with the setup.
Delay setup work-sheet
DECIDE where you will be sitting while enjoying a movie.
MEASURE the distance from the seat-back to each of the six speakers and fill in the blanks below. (Use a pencil in
case you change something later on).
A. FRONT LEFT
-
______ ft (to nearest foot)
B. CENTER
-
______ ft ( “ )
C. FRONT RIGHT
-
______ ft ( “ )
D. RIGHT SURROUND
-
______ ft ( “ )
E. LEFT SURROUND
-
______ ft ( “ )
F. SUBWOOFER
-
______ ft ( “ )
In the first line below fill in the name of the speaker furthest from the listening position and the distance it is from the
listening position in
each of the five spaces following the name. Next fill in the name of each of the other five speakers
in the next five lines. In the spaces arrayed beside each of the speakers you have named write in the distance each
one is from the listening position. Subtract the distance of each of those five speakers from the first line and write the
result in the space below it on the “DIFFERENCE” line. There can be two or more speakers equally “furthest” from the
listening seat.
FURTHEST
SPEAKER
-
Name: _____________(F) _____ft _____ft _____ft _____ft ____ft
SPEAKER
-
Name: _____________(1) -_____ft
SPEAKER
-
Name: _____________(2) -_____ft
SPEAKER
-
Name: _____________(3) -_____ft
SPEAKER
-
Name: _____________(4) -_____ft
SPEAKER
-
Name: _____________(5) -____ft
DIFFERENCE
-
(1)_____ft (2)_____ft (3)_____ft (4)_____ft (5)____ft
On the line above, each result has a number preceding it which matches the number beside a speaker name you have
written in. The result for each speaker is the number of feet each is closer to the listening position. These results must
be transferred to the Delay setup options for each speaker. It is quite easy to do.
A NOTE ABOUT AVAILABLE SPEAKERS
If you previously have configured your system as
having no subwoofer, and/or no center speaker or no
surround speakers, they WILL NOT appear in the
Delay setup speaker selection menu. If you do have
the speakers but they don’t appear in Delay setup,
check in “Speaker setup” to make sure you have not
said “none” or “no” in error.