30
Section 5: Initial System Configuration
We’ll make many references to a “menu” In this Section of the
manual. Be aware
that the
SSP-25
provides no onscreen setup, but instead provides all information
for setup on its own faceplate screen. The information provided is simple and
straightforward.
The
Main (Configuration) MENU System
is a complete series of help screens
that lead you through the relatively few steps needed to fully customize the
operation of the
SSP-25
.
5.1 Introduction
Configuration consists of two basic steps:
1) Telling
the
SSP-25
what it needs to know about other system components
2) Telling
the
SSP-25
what it needs to know about your room and loudspeakers.
Of course, there are several elements in each step but remembering these two functional differences will
help you keep your bearings as you follow these suggestions.
5.1.1
What You’ll Need
The Configuration
MENU
System will guide you through all available choices. You’ll also need the
SSP-25
’s
hand held remote control.
5.1.2 The
MENU
Tree
The
MENU
Tree diagram on the following page will guide you as you move through the various menu screens.
It shows all the choices available and how to reach particular screens efficiently. As you begin to configure the
SSP-25
, you’ll find that you’ll need this diagram less and less. The menu displays themselves provide almost
all the information you’ll need to select and lock into memory the various adjustments.
