40
I hear a ”beep” from the receiver when I make a call:
-
You may be moving out of range of the base unit.
Move closer or your call may be lost.
-
Check the symbol for the battery level on the display.
If it is low then recharge the batteries.
The function for caller id does not work:
-
You must subscribe to caller id through your phone company.
The person calling may have concealed number or from a
network that does not support caller id (e.g. international calls
or a switchboard).
I hear a busy tone when I try calling:
-
If you have extra receivers registered to your base unit, check
that another receiver is not being used.
The volume in the receiver is low when I call:
-
Make sure the receiver is correctly placed in your ear. Adjust
the volume by using
▲
or
▼
.
The receiver does not work despite 15 hours charge:
-
Remove the batteries and let them rest for a few seconds
before replacing them. If the problem remains you may have
to change the batteries.
The receiver’s batteries discharge after an hour or two:
-
Before the phone is used it should be charged for 15 hours.
-
If the batteries are old they may have to be replaced.
-
Clean the charging contacts with a clean cloth.
-
Check the connection between the base unit and the wall
socket.
