2
Using a system with several receivers
You can register several receivers for the base unit. Up to 5
receivers can be registered. With two or more registered receivers
you can:
-
Make internal calls from one receiver to another.
-
Forward a call from one receiver to another.
-
Change between external calls and internal calls.
-
Arrange a three way call.
-
Each receiver’s number (HS 1 to HS 6) is shown on its display.
NB:
-
Only one receiver can be connected to the external line at the
same time.
If you are trying to make an external call between while a re-
ceiver is already connected to the line you will hear a busy tone,
however you can still make an internal call to a vacant unit.
Making an internal call
1. Push
INT
, a tone is heard and the display shows ”
HS ?
”.
2. Enter the number of the which receiver you want to call (1-5).
3. The other receiver rings and diplays the caller`s infpormation.
Answering an internal call
Answer the call on the other receiver by pushing
O K
RD
/ P
or
INT
.
Ending an internal call
Push
O K
RD
/ P
or place the receiver in the charger to end the call.
