36
Changing the unit’s settings
The preset tone (also called DTMF) is the most common type.
This normally does not need to be changed.
Choosing calling type (tone or pulse)
1. In the standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown
on the display.
2. Push
▼
twice,
BS SETTINGS
is shown.
3. Push
O K
RD
/ P
,
DELETE HS
is shown.
4. Push
▼
,
DIAL MODE
is shown.
5. Push
O K
RD
/ P
,
TONE
is shown (preset option).
6. Use
▲
or
▼
to switch between
TONE
and
PULSE
.
7. Confirm with
O K
RD
/ P
.
8. Push
O K
RD
/ P
to return to standby mode.
Changing PIN code
The PIN code is used to protect some of the receivers and the
base unit’s settings from unauthorized acces. The preset PIN
code at delivery is
0000
but may be changed if desired.
1. In standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown on
the display.
2. Push
▼
twice,
BS SETTINGS
is shown.
3. Push
O K
RD
/ P
,
DELETE HS
is shown.
4. Push
▼
three times,
MODIFY PIN
is shown.
5. Push
O K
RD
/ P
,
PIN ?
is shown. Change the base unit’s PIN code
(preset code 0000).
6. Push
O K
RD
/ P
,
NEW PIN
is shown. Enter a new code.
7. Push
O K
RD
/ P
,
REPEAT
is shown. Enter the same code again.