3
Troubleshooting
Check that:
-
You have followed the installation guidelines.
-
All units are correctly connected to the phone line and the mains.
-
That the wall socket works.
-
That the receiver’s batteries are correctly inserted and are
charged.
Common use
The receiver does not start:
-
Check that the receiver’s batteries are correctly inserted and
are charged.
-
Check that the charger is connected and the phone is charged
in the charger.
The receiver works but cannot be connected to the base unit:
-
Check that the base unit is connected to the mains.
-
Make sure that the wall socket where the base unit is
connected works.
-
Register the receiver again to the base unit.
It is not possible to make or receive calls:
-
If the receiver’s display is not lit it may be turned off. Push
O K
RD
/ P
to turn it on again.
-
Check that the base unit’s adaptor is correctly inserted. The
base unit needs power in order for the phone to work properly.
-
Make sure you are using the phone lead that was delivered
with the phone. Other phone leads may not work.
-
Move the receiver closer to the base unit.
-
Check the battery level on the display. If it is low, place the
receiver in the charger and recharge the batteries.
-
Unplug the adaptor from the wall socket, wait few seconds
and insert it again. That may solve the problem.
