33
Adjusting the receivers
You can adjust the receiver settings by using the display menu.
Changing the receiver’s name
Change the name that is shown in standby mode. It will make it
easier to separate the receivers if you are using several.
1. In standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown on
the display.
2. Push
▼
three times,
HS SETTINGS
is shown.
3. Push
O K
RD
/ P
,
ALARM
is shown.
4. Push
▼
four times,
HS NAME
is shown.
5. Push
O K
RD
/ P
and then use the digit buttons to enter the
desired name/text. See the "phone book" section for further
explanation of signs.
6. Confirm with
O K
RD
/ P
.
7. Push
O K
RD
/ P
to return to standby mode.
Auto reply
Activating auto reply. If the receiver is placed in the charger you
only need to pick it up to answer a call without pushing any buttons.
1. In the standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown
on the display.
2. Push
▼
three times,
HS SETTINGS
is shown.
3. Push
O K
RD
/ P
,
ALARM
is shown.
4. Push five times on
▼
,
AUTO ANSWER
is shown.
5. Push
O K
RD
/ P
,
ON
or
OFF
shows depending on setting.
6. Use
▲
or
▼
to select
ON
or
OFF
.
7. Confirm with
O K
RD
/ P
.
8. Push
O K
RD
/ P
to return to standby mode.