E
N
G
LI
S
H
4-Pin Power Input
SATA Connection
SATA Cable
To Mother Board
. Install the insertion bay in an available .” and
.” bay in the computer
1. Turn off the computer, pull out the power cable and open the computer case.
2. Use the included screws to assemble the insertion bay from the side and
underside.
3. Install the insertion bay
(5.25˝ and 3.5˝ or 3.5˝ only)
in an available bay in the
computer with the included
screws.
4. Connection cables:
• 4-pin internal power cable; connect the cable to the hard drive case and the
opposite end to a power cable from the computer’s power supply.
• Connect the included SATA cable to the case and the other end to the
computer’s motherboard.
