6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
A build-up of moisture or oil in the air compressor will accelerate wear and
corrosion in the air tool. Ensure any moisture is drained from the compressor
daily and the inlet filter is kept clean.
If an unusually long air hose is required, (over 8 metres), the line pressure or the
hose inside diameter may need to be increased.
The air hose must be rated at least 150% of the maximum operating pressure of
the air tool.
Never exceed the maximum operating pressure. It is recommended that air
pressure does not exceed 90 psi (6.2 Bar) at the tool when running. Higher
pressures and dirty air will shorten the life of the tool due to faster wear and is a
possible safety hazard.
PRODUCT OVERVIEW
1
½
”
Square Drive shaft
5
Extension bar
2
Trigger
6
Air exhaust
3
Allen key
7
Direction/Speed Control
4
Inlet adaptor
8
Airline Inlet
Summary of Contents for X-Pro CAT198
Page 16: ......