4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• The tool will be left unattended.
• Moving to another work area.
13. NEVER use the tool if it is defective or operating abnormally.
14. Avoid damaging the tool by applying excessive force.
15. ALWAYS maintain the tool with care. Keep it clean for the best and safest
performance.
16. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
17. DO NOT force or misuse the tool. It will do a better and safer job at the rate
for which it was designed.
18. This air tool vibrates with use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs.
Seek medical advice before resuming use.
19. NEVER carry the wrench by the air hose.
20. NEVER carry the wrench with your finger on the trigger.
21. When not in use the wrench should be disconnected from the air supply
and stored in a dry place out of reach of children.
IMPACT WRENCH SAFETY INSTRUCTIONS
1. ALWAYS
use the wrench as described in these instructions.
2. ALWAYS
ensure the wrench is not moving and disconnected from the air
supply when changing sockets etc.
Use only Impact Wrench sockets....DO
NOT use standard sockets.
3. ALWAYS
finish tightening wheel nuts or engine components with a torque
wrench or suitable spanner to the correct torque as recommended by the
vehicle manufacturer.
4. ALWAYS
avoid excessive use of the wrench. When tightening a nut or bolt,
only allow the wrench to impact briefly to avoid over tightening.
5. ALWAYS
ensure that the socket is correctly installed before switching on.
6. Only use sockets which are specified for impact wrench use.
7. Due to the possible presence of asbestos dust from vehicle brake linings,
always wear suitable respiratory protection.
8. ALWAYS
disconnect from the air supply when changing sockets or when
the wrench is not required for immediate use to avoid accidental starting.
9. ALWAYS
use both hands to control the impact wrench.
10. ALWAYS
ensure the wrench has stopped before putting it down after use.
Summary of Contents for X-Pro CAT198
Page 16: ......
