17
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
1. Take the sliding plate, complete
with track slide and angle pointer
fitted, and add the handle using a
20mm coach bolt.
1. Attach the rip fence carrier track
to the table front using 2 x
carriage bolts M6x25, 2 washers
and 2 locking levers. Leave the
locking levers loose at this stage.
2. Slide the rip fence sliding plate along the carrier track and tighten the
locking levers to hold it in position.
3. Add the rip fence to the sliding
plate by sliding the 20mm
carriage bolts along the moulded
track in the fence. Pass the bolts
through the locating holes in the
fence support and secure with
the 2 x wingnuts.
4. Add the plastic end caps to the
fence.
NOTE:
The fence can be installed
either upright or on its side.
5. Slide the fence assembly along the track and tighten the locking levers to
grip it in position as required.
Summary of Contents for WOODWORKER 6460015
Page 32: ......
