14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6. Loosen the bolts on the corner
diagonally opposite the switch
and bolt the hose securing
bracket to the table (shown the
right way up).
7. With the help of an assistant, turn
the assembly the right way up.
8. With the assembly standing on a
flat, level floor, check that the
assembly is standing level and
that the legs are an equal distance apart before tightening the securing
bolts evenly.
9. Bolt the handles to the legs on
one end of the assembly, using
bolts/nuts/2 x washers.
10. Push-fit the rubber feet onto the
end of each leg.
11. Bolt the wheels and axle assembly
to the legs at the opposite end of
the machine to the handles.
Note that the wheels should be
almost touching the floor.
12. With the blade and riving knife
supplied fitted, fit the blade guard
to the riving knife. Engage the
socket in the guard with the slot in
the riving knife and tighten the
screw/locknut to pinch it to the
knife ensuring it can still move up
and down in use.
• The blade guard must always
be used.
Summary of Contents for WOODWORKER 6460015
Page 32: ......
