EN
ENGLISH
Clarke
®
Operator's Manual (EN) - Ultra Speed Burnisher
FORM NO. 71280A - 9 -
n
n
How to Put the Machine in Storage
WARNING:
Always remove the electrical plug from
the electrical outlet before installing or
changing the bag.
To put the machine in storage, follow this procedure:
1. Put the handle in the vertical position.
2. Disconnect the power cord from the electrical outlet.
3. Pull the handle to the
fl
oor so that the pad is exposed.
4. Check the pad.
5. Remove or replace the pad if worn or dirty.
6. Put the machine in the verticle position.
7. Wind the power cord around the handle and cord wrap.
8. Depress the handle release lever and fold the handle horizontally
across the motor.
9. Tilt the machine so that it sits on its rear wheels and link arms.
See
fi
gure 5.
NOTE: Do not store the machine resting on the pad driver,
the pad driver will warp and cause vibration.
Inspection and Repairs
Take the machine to the nearest Clarke authorized repair location
once a year for the maintenance inspections.
To make any repairs, take the machine to the nearest Clarke au-
thorized repair location.
WARNING:
Maintenance and repairs
must be done by authorized person-
nel only
Figure 5
https://harrissupplyind.com - To Order Parts Call 608-268-8080
