EN
ENGLISH
-6- FORM NO. 71280A
Clarke
®
Operator's Manual (EN) - Ultra Speed Burnisher
240 VOLT MACHINES
Instructions for connection to the power supply and the
electrical ground.
This product must be grounded. If the installation should
breakdown, grounding provides a path of low resistance
for electric current to reduce the risk of electrical shock.
This product is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a quali
fi
ed
electrician or service person if you are in doubt as to whether
the outlet is properly grounded.
This product is for use on a nominal 240 volt circuit. The plug
on this product must be replaced with a three contact ground-
ing style plug, having a con
fi
gration appropriate for connection
to the local power supply. The new plug must be installed by a
quali
fi
ed electrician.
WARNING:
To prevent possible electric shock, protect the machine from
rain. Keep the machine in a dry building.
WARNING:
To prevent possible electric shock, always use a 3-wire electri-
cal system connected to the electrical ground. For maximum
protection against electrical shock, use a circuit that is
protected by a ground fault circuit interrupter. Consult your
electrical contractor.
WARNING:
Do not cut, remove or break the ground pin. If the plug does
not
fi
t your outlet, consult your electrical contractor.
WARNING:
Have worn, cut or damaged cords replaced by an authorized
service person.
EXTENSION CORDS
Use only an approved extension cord with three conductors,
a plug with three terminals, and a connector body with three
holes. The machine has a power cord with wire size 14 AWG.
WARNING:
If you use an extension cord, use an extension cord with mini-
mum wire size 12 AWG. Do not use an extension cord longer
than 50 feet. Do not join two extension cords.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
