27
SPECIFICATIONS
Please note that the details and specifications contained herein, are correct at the time of
going to print. However, CLARKE International reserve the right to change specifications at any
time without prior notice. ALWAYS CONSULT THE MACHINE’S DATA PLATE
* Duty Cycle:
Determines the machine ‘down time’.
eg. Operating at MIN setting and welding thin material, the Duty Cycle is 100%. i.e. the
welder may be used continuously.
At MAX setting, welding thick material (4mm), the Duty Cycle is 12%. This means that in ANY
10 minute period, the machine may be used for a total of 1.2 minutes and must have a
down time of 8.8 minutes.
Always bear in mind that the welding current will be influenced by the thickness and
characteristics of the workpiece....the thicker the workpiece, the greater the current.
Power Supply ................................................................. 230V, 50Hz 1Ph
Fuse Rating ..................................................................... 13Amps
Current Range ............................................................... 27 - 85Amps
Max. Metal Thickness ................................................... 4mm
Welding Wire Sizes ......................................................... 0.9mm Flux Cored
Duty Cycle*
MIN (27A) .................................................... 100%
MAX (85A) .................................................. 12%
Dimensions ..................................................................... 380x175x350mm
Weight (net) ................................................................... 20.4kg
Part No. ........................................................................... 6010109
ACCESSORIES
The following accessories are available from your Clarke dealer. Please quote the
part numbers shown below:
Welding Wire Spool
Part No.
Mini - 0.9mm (FLUX Core)
6000664
Summary of Contents for MIG85ENB
Page 24: ...PARTS DIAGRAM 24...
