19
PREPARATION FOR USE
A.
PREPARE THE WORK
MOST IMPORTANT!
It is VITAL that the workpiece is perfectly clean at the point of weld. Any coating,
plating or corrosion MUST be removed, otherwise a good weld will be impossible
to achieve.
B. SET THE CONTROLS
Three switches are provided....(1) ON/OFF, (2) MAX/MIN and (3) WIRE FEED.
The ON/OFF switch is self explanatory, but serves a secondary function. You will
note that it is coloured amber. The switch doubles as a lamp, which will illuminate
if the Thermal Overload intervenes. Please see the notes on page 21.
The MAX/MIN switch controls the welding current....and the ‘WIRE FEED’ rotary
knob controls the speed of the wire feed to the nozzle.
In order to determine the correct settings for the job in hand....the following table
serves as a useful reference.
Summary of Contents for MIG85ENB
Page 24: ...PARTS DIAGRAM 24...
