15
UNPACKING & PARTS IDENTIFICATION
Unpack and lay out the components, checking against the following list. Any
damage or deficiency should be reported to your CLARKE dealer immediately.
Some of the components are stored within
the side compartment.
To open the
compartment, pull the side panel up, as
indicated in Fig.1.
The cover may be quite tight when new, so
ease off gently.
1.
Welder complete with Torch and Hose,
Earth Cable with Clamp and Power cable.
2.
2-Piece Welding Mask
3.
Welding Mask handle, complete with
plastic nut and 2xPlastic screws.
4.
Package containing 1xClear Glass
and Dark Glass Lens
5.
Wire Spool, fitted to the Spool Holder
6.
Spare welding tip
Fig.1
Summary of Contents for MIG85ENB
Page 24: ...PARTS DIAGRAM 24...
