11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SHARPENING TIPS
SCISSORS
If possible, take the scissors apart to make the sharpening operation easier
and safer. Remove material only from the outside surface and work from the
handle end of the blade towards the tip.
KNIVES
Remove metal equally from both faces, working from the handle end of the
blade towards the tip.
MAINTENANCE
Keep the machine clean by wiping off dust with a clean cloth, and
occasionally blowing the grinder through with compressed air. Always wear
protective goggles when blowing through with compressed air.
The grinding wheel may need trueing or dressing occasionally. Only dress the
wheel with a proper dressing tool whilst wearing safety goggles or glasses. If in
doubt seek expert advice.
DRESSING THE WHEEL
When the abrasive wheel starts to become clogged with debris, use the
dresser tool supplied to clean (dress) it.
1. Start the bench grinder running.
2. Place the dresser tool on the tool rest with the dresser wheels facing the
grinding wheel.
3. Slide the dresser tool forward until contact is made with the abrasive wheel
and maintain a light pressure to clean the debris from the abrasive wheel.
4. After dressing, adjust the tool rest and spark deflector as necessary.
WARNING: DISCONNECT THE GRINDER FROM THE MAINS SUPPLY BEFORE
FITTING REPLACEMENT WHEELS, CLEANING OR ADJUSTMENT.
Summary of Contents for Metalworker CBG8370LW
Page 16: ......
