5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8.
ALWAYS check for damaged parts. Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine if it would operate
properly and perform its intended function. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the tool's
operation. A part that is damaged should be properly repaired or replaced at an
authorised service centre. Following this rule will reduce the risk of electric shock, fire
or serious injury.
9.
Eye protection manufactured to the current European safety standards should be
worn when operating grinding equipment.
10. Eye guards supplied with the machine must be used at all times.
Note: Bench grinders used in industrial environments may be subject to the
requirements of The Provision and Use of Work Equipment regulations 1992
(particularly regarding the training requirement of The Abrasive Wheels
Regulations 1970), or other legislation. If in doubt seek advice.
SAFETY SYMBOLS
Read Instruction Manual Before Use
This Machine Is Not Suitable For Hand Held Use
Not Permitted For Wet Grinding
Wear Eye Protection
Wear Ear Defenders
Summary of Contents for Metalworker CBG8370LW
Page 16: ......
