9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING THE MAINS WATER SUPPLY
The pressure washer must never be connected to the drinking water supply
without using a system separator (also known as a backflow preventer)
available from most hardware stores.
Always follow the regulations of your local water supplier.
1. Connect the water supply hose to
the inlet adaptor supplied with the
machine. A standard proprietary
hose is suitable.
2. Screw the inlet adaptor to the
water inlet as shown.
• It is recommended to use a
reinforced hose having an
inner diameter of at least 10
mm.
• The water supply must be able to deliver at least 15 l/min and have a
max inlet temperature of 65°C.
ASSEMBLING THE LANCE
1. Connect the spray lance to the gun assembly and tighten securely by
turning the locking ring.
CAUTION: WATER THAT HAS FLOWED THROUGH A SYSTEM SEPARATOR IS
CONSIDERED NON-DRINKABLE.
Summary of Contents for HLS130
Page 32: ......
