12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GETING STARTED
1. Ensure that the water supply is correctly connected and turned on.
2. Set the start switch (C) to ‘I’.
3. Release the trigger lock.
4. When using the machine for the
first time, let it run for a few
moments without the nozzle so
that any air bubbles or other
impurities are discharged.
5. Then re-fit the nozzle. pull the
trigger for a few seconds to
discharge any air contained in
the hose.
NOTE:
When the trigger is pulled the
pressure of water will cause
the lance/gun assembly to
kick back suddenly.
6. The washer incorporates a total
stop system. When the trigger is
released the motor will stop. This
system is designed to protect the
motor and is also an important
safety feature.
USING THE WASHER AT DIFFERENT TEMPERATURES
1. Set the Temperature Selector (B) to the required temperature.
2. Set the start switch (C) to ‘I’ .
3. Set the Temperature Selector (B).
4. Ensuring that you have a firm footing and that you are also holding the gun
and spray lance firmly, pull the trigger on the gun to start water flow.
WARNING: FAILURE TO TURN ON THE WATER FULLY COULD CAUSE
DAMAGE TO THE PRESSURE WASHER.
WARNING: THE BURNER EXHAUST MUST BE VENTED TO THE OUTSIDE
ATMOSPHERE. ALL VENTING MUST BE IN ACCORDANCE WITH APPLICABLE
LAWS AND LOCAL ORDINANCES FOR SUCH INSTALLATIONS.
Summary of Contents for HLS130
Page 32: ......
