10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING THE HIGH PRESSURE HOSE
1. Screw the high pressure hose onto
the gun assembly.
2. Use a spanner to tighten the
connector.
3. Screw the other end of the hose
on to the pressure washer outlet.
• Tighten the connector hand
tight only;- do not use a
spanner.
NOTE:
Make sure the connections
are secure.
PARKING BRAKE
Before you operate your pressure
washer you should make sure that
the parking brake is engaged.
To do this press the brake flap shown
in the picture against the wheel to
engage the parking brake.
Flip the flap upwards to release the
brake and allow you to move the
pressure washer.
Summary of Contents for HLS130
Page 32: ......
