16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
EVERY 3 MONTHS 0R AFTER 300 HOURS OF WORK
CLEANING/REPLACING THE FUEL FILTER
1. Remove the cover from the
pressure washer.
2. Rmove & replace the fuel filter
(A).
3. Clean or replace the detergent
filter (B).
If dirty, either clean with a jet of
compressed air or replace it with a
new filter.
SERVICING
These tasks must be carried out by skilled service personnel.
EVERY MONTH OR AFTER 100 HOURS OF OPERATION
CLEANING THE COMBUSTION HEAD & CHECKING THE ELECTRODES
It is recommended that the burner and electrodes be serviced yearly, or
as needed depending upon the pressure washers' usage.
Please contact the CLARKE International Service Dept.
LIMESCALE
Periodically the heating coil should be checked for limescale buildup,
dependant upon the hardness of the local water supply.
Please contact the CLARKE International Service Dept.
SOOT BUILD UP
Poor grades of fuel oil or inadequate combustion will cause heavy build
up of soot on the heating coil. This deposit will insulate the coil and
Summary of Contents for HLS130
Page 32: ......
