9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
LOOSE COMPONENTS
Unpack and lay out the components, checking against the following list.
Please report any damage which may have occurred during transit, to your
CLARKE dealer immediately.
PREPARATION FOR USE
1. Fit the electrodes to the electrode arms. Whether or not the longer
electrode is located in the upper or lower arm, depends upon the work in
hand. It may be necessary for example to reach over a lip in a workpiece,
necessitating the longer electrode to be positioned in one particular arm.
Normally however, the longer electrode is located in the upper arm. Nip up
the clamps but do not fully tighten.
No
Description
No
Description
A
1 x Handle
D
2 X Hex Wrenches
B
2 x Electrode Holders
F
1 x M6 screw
C
2 x Electrodes (straight)
WARNING: ENSURE THE WELDER IS DISCONNECTED FROM THE POWER
SUPPLY BEFORE PROCEEDING
Summary of Contents for CSW13T
Page 20: ......
