3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY WARNINGS
ELECTRIC SHOCK
1. Remove the plug from the socket and wait 5 minutes to allow the
capacitors to discharge before carrying out any servicing or maintenance
on this welder.
2. Do not touch live electrical parts.
3. Never use electrode holders or cables which are damaged.
4. Keep the working environment, equipment, cables and clothing free from
grease, oil, moisture and dirt.
5. Ensure the welding machine has been correctly earthed.
6. The operator must be insulated from the floor and work bench using a dry
insulation mat.
7. Always ensure a second person is present in case of accident.
8. Keep welding cables away from power cables.
9. Regularly inspect the condition of the cables for signs of damage.
10. Remove the plug from the mains socket when not in use.
11. Ensure the earth connector is secured to bare metal adjacent to the weld,
and when not in use insulated for safety. - Keep all equipment well
maintained.
12. The operator must prevent any gas cylinders in the vicinity of the work
piece from becoming part of the welding circuit.
FUMES & GASES
1. The welding process generates hazardous fumes as a by-product.
Inhalation of these fumes is hazardous to health.
2. Keep your head away from the weld to avoid breathing the fumes.
3. If welding in confined spaces ensure adequate ventilation and use a fume
extractor.
By-products of welding can react to create a toxic/explosive environment
WARNING: WHEN USING ELECTRICAL TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK AND PERSONAL INJURY
WARNING: READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO
OPERATE THIS PRODUCT AND KEEP THESE INSTRUCTIONS IN A SAFE PLACE.
Summary of Contents for CSW13T
Page 20: ......
