7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MACHINE FEATURES
MODEL CSW6T
This 230V 50Hz, portable Spot Welder is
provided with an electronic timer
which allows precise control of
welding time. The control knob is
arrowed in Fig 1. Electrode pressure
may be mechanically adjusted from
40 to 120kg, to spot weld low carbon
sheet steel up to 1 + 1 mm in thickness.
MODEL CSW13T
The most important features of this
230V 50Hz Portable Spot Welder are
controlled by a microprocessor,
managed from the control panel
shown in Fig. 2. These features are:
1. Welding time, set according to the
thickness of metal to be welded.
2. Changing selection for welding
thickness.
3. Changing resistance welding
machine operating mode...
normal or pulse.
Selecting ‘PULSE’ mode improves
welding capacity on material with
high yield points or materials with
protective coatings. The pulsation
period is preset and does nor require
adjustment.
4. Electrode pressure may be
mechanically adjusted from 40 to 120kg, to spot weld low carbon sheet
steel up to 2 + 2 mm in thickness.
BOTH MODELS
Both 120mm electrode arms and standard electrodes are provided.
• An eye bolt may be fitted to the machine (see your Clarke dealer),
for use in supporting the machines weight when repetitive welds are
required (see your Clarke dealer.
IMPORTANT! When using the Eye
Bolt, take care NOT to screw it more than 8mm into the screw hole.
Summary of Contents for CSW13T
Page 20: ......
