background image

5

SAFETY PRECAUTIONS cont.:

Always disconnect from the air supply when:

a)

Performing any maintenance such as clearing a jammed nail.

b)

The nailer is not in use.

c)

The nailer will be left unattended.

d)

Moving to another work area.

e)

Passing the nailer to another person.

Use only the nails, parts and accessories described in this book.

Only carry out the maintenance recommended in this booklet. For replacement
of parts or repair, return the nail gun to the place of purchase.

TRANSPORTATION

Always disconnect from the air supply before moving from one work area to another.

Always disconnect from the air supply before passing the nailer to another person.

Never carry the nailer by the air supply hose.

Never carry the nailer with your finger on the trigger.

STORAGE

When not in use the nailer must be disconnected from the air supply and stored in
a dry place out of the reach of children (preferably in a locked cabinet).

Remove any nails from the nailer magazine while in storage.

Avoid storing the nailer in environments where the temperature can fall to below
0

o

C.

PARTS

Air
Deflector

Trigger

Magazine

Striker
Cover

Quick Fit Coupling

Magazine
Release
Catch

Summary of Contents for Contractor CFN34












Reviews: