3
SAFETY PRECAUTIONS
NEVER
load the rack with more than the maximum permitted working load.
ENSURE
that the rack is installed in a location strong enough to take the
combined weight of the rack and whatever is being stored on it. (max 120kg)
ALWAYS
check for damage before use. Any damage should be properly
repaired or the part replaced. If in doubt,
DO NOT
use. Consult your dealer.
ENSURE
that the weight is evenly distributed across the full width of the rack
rather than in one place, especially the centre.
ALWAYS
keep storage area tidy. Cluttered areas invite accidents.
ALWAYS
ensure that adequate lighting is available and well positioned.
NEVER
swing or climb on the garage rack.
ALWAYS
fix the rack to a solid masonry wall able to take the load of 120kg.
USER INSTRUCTIONS
Install the rack using the fixing screws provided.
1. Mark the positions of the fixing holes accurately on the wall.
2. Use a hammer drill with an 10 mm bit to create holes for the wall plugs.
3. Extend the rack to suit the width between the walls and secure in place
with the fixing screws provided. The frames can be adjusted to any width
between 1900 and 3300 mm.
4. Always distribute any heavy loads evenly across the rack.
