manualshive.com logo in svg
background image

Page 4 of 4                                                                                                                                                                                                                                                  Page 1 of 4 

 

 

b) Mounting to solid wall     

Use solid wall anchor* along with the wood screws (Part-X1). First drill a hole for solid wall 
anchor, put it in, attach the Part-A (wall plate), and screw Part-X1(wood screw) into the solid 
wall anchor.   

*solid wall anchor is sold separately, or available in local hardware stores. 

 

 

Warning

: Make sure the wall can support the combined weight of mount and the TV.   

 

Step3: Hang the TV with the interface arm installed (Part-B) onto 
the wall plate (Part-A) 

 

Hook the TV with arms (Part-B) installed onto the top of the wall pate (Part-A), then slowly 
swing screen inward. Then please slide in the anti-theft bar (Part-C).   

Optional

: A padlock can be used to lock Part-A and Part-C together, if anti-theft is necessary 

 

 

 

Installation Instructions 

PFM-Series Flush TV Wall Mount 

     

                            www.RiteMounts.com 

 
DISCLAIMER 

This document is intended to be made accurate and complete. However, there is no 
guarantee the information contained herein covers every aspects. The manufacturer 
and the distributor make no representation of any warranty regarding the information 
contained, and assume no corresponding responsibility.   

 

WARNING:

   

 

Prior to installation, please read and understand this instruction manual. If you have 
any questions or uncertainties, please consult your seller or local professionals.   

 

If the wall structure could not support the combined weight of mount and the TV, 
please reinforce the wall prior to the installation. Installation on drywall may be 
dangerous. 

 

For installation on wood stud, please make sure the wood screws are in the center of 
the wood stud, using an “edge to edge” stud finder is recommended.   

 

To avoid damage a flat panel television set should never be laid flat. It must remain 
in an upright position. 

 

Tighten the screws firmly, but never overtighten. 

Features: 

 

Designed for 37” to 63” flat screen TVs. 

 

Ultra slim design holds the screen only 15/16” from the wall. 

 

A padlock can be added for security. 

 

Holds TV up to 170 LBs. 

Required tools:   

 

Stud finder; Screwdriver; Level; Drill 

Parts list: 

 

 

Отзывы: