background image

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

Installation manual

VWS-Cube

INSTALLATION AND USE INSTRUCTION

Floor structure videowall

Pag.:

Warning

 

For correct and safe use

This manual contains instructions and drawings for correct and safe use of the product. 

Non-compliance with descriptions and drawings and/or improper use of the product could cause the effects specified below.

Please

 note the following hazard symbols before reading the remainder of this session, and follow the instructions thoroughly.

 Danger

: any failure in observing these instructions could lead to death or serious injuries.

Warning

: any failure in observing these instructions could lead to failure or damage to objects.

Meaning of the symbol: the        symbol warns against doing something 

 

Special precautions for safety.

Danger

 

- Follow the instructions reported in this manual about the installation method. Any failure in observing these instructions could 

  lead to damage or injuries due to MONITOR set or other objects falling down.

- Please use qualified personnel for installation

- Make sure that the wall where the MONITOR set has to be installed can bear the weight of the MONITOR set itself.

- Do not apply any other weight to the MONITOR set or the bracket. This could make the MONITOR set fall down and cause injuries or damage 

   to objects.

- Do not change or alter the components for installation. This make the MONITOR set fall down and cause injuries or damage to objects.

 

Warning

 

Carry out the installation in places without humidity or dust.

        - Do not install the MONITOR screen in places with a high degree of humidity  

           and dust. This could bring about fire or electric shocks.

        - Do not install the MONITOR screen in places where it could get in contact 

           with fumes or vapours. This could bring about fire or electric  shocks.

Carry out the installation in a well vented area.

   - Do not obstruct the holes for air passage on the MONITOR screen. This 

      could bring about fire.

   - Do not place the MONITOR set in a poorly vented place.

Please take careful note of the following: 

use qualified personnel for the installation. 

The producer will not bear responsibility for any improper installation or any accident, damage or injury that may come arise from incorrect installation.

DE

Installationsanleitung

ES

Guía de instalación

GB

Installation manual

FR

Guide d‘installation

SE

Installationsanvisning 

TR

Yükleme Rehberi

RU

инструкция по установке 

NL

Installatievoorschrift 

CN

安装指南 

Summary of Contents for VWS-Cube













Reviews: