I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000307
©
2006 Chief Manufacturing
www.chiefmfg.com
03/06
BEFORE YOU BEGIN
19" EQUIPMENT RACK ACCESSORY
Model: FSA-1015
Specifications:
•
Designed for equipment rack with 19" wide
vertical attach rails.
•
Accommodates the following installation
configurations:
- Direct installation of VESA compliant
display/interface (75x75mm, 100x100mm,
and 100x200mm)
- FWD Cynergy Wall Mount
- FSR and FTR Fusion Wall Mounts
•
Weight capacity of 30 lbs (13 kg).
FSA-1015
(Shown with optional Equipment Rack,
FTR, and FWD mounts)
WARNING:
It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
•
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
