Clarke BEXTSPOT 04153A, Operator'S Manual

Page: 7 / 28

EN
ENGLISH
Clarke
®
B
EXT
S
POT TM
Operator's Manual (EN) FORM NO. 70781A - 7 -
No vacuum. 1. Loose vacuum hose or 1. Secure hose connections
loose vacuum connection...
Low vacuum. 1. Defective vacuum hose... 1. Repair or replace hose.
2. Loose connection to the 2. Secure connections
vacuum motor(s)...
No electrical power. 1. House or building circuit breaker tripped... 1. Reset circuit breaker.
2. Defective power cord... 2. Contact an authorized service person.
Switch is turned on. Power 1. Faulty electrical cable... 1. Contact an authorized service person.
is intermittent to all motor(s).
2. Defective switches... 2. Replace Switch
3. Loose terminal or discolored terminal 3. Contact an authorized service person.
connections...
PROBLEM CAUSE ACTION
HOW TO CORRECT PROBLEMS IN THE MACHINE
Electrical System
PROBLEM CAUSE ACTION
Vacuum System
Pump motor on, no spray 1. Clogged spray tips. 1. Clean spray tips
thru accessory tool(s).
2. Punctured pump diaphragm... 2. Contact an authorized service person.
3. Crack in pump housing. 3. Contact an authorized service person.
Uneven or weak spray 1. Clogged or dirty spray tips... 1. Clean or replace spray tips.
Vacuum motor(s) working, 1. Loose plug connector. Loose wiring 1. Check connections and tighten if
pump motor fails to turn on. connection... necessary.
2. Defective pump motor... 2. Contact an authorized service person.
PROBLEM CAUSE ACTION
Solution System
WARNING: Maintenance and repairs must be done by authorized personnel only. Use only Clarke parts. Maintenance
performed by someone other than a Clarke distributor or Clarke replacement parts could void your warranty.
EN
ENGLISH