4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
1. Due to the weight of the press, lifting equipment and the help of an
assistant will be required during installation. Fix the press to the floor using
suitable anchor bolts.
2. Before starting work, check for signs of cracked welds, loose or missing
bolts, damaged screen, or any other damage. Do not use if any of these
conditions exist. Have repairs made only by authorised service centre.
3. Before work, always ensure that hydraulic hoses and couplings are
completely sound.
4.
NEVER
tamper with the press components or modify them. The safety valve
is set and sealed at the factory; do not attempt to adjust the setting.
5. Use only the recommended hydraulic oil.
6. The components of this press are designed to withstand the rated load. Do
not substitute any other components or exceed the rated load of the press.
7. Before applying pressure, ensure the workpiece is firmly secure and stable.
8.
ALWAYS
clean up spills of hydraulic oil immediately as this can be
dangerous in a workshop environment.
9. Do not let any person who is unfamiliar with hydraulic presses use the press
unless they are under direct supervision.
10. Keep children and unauthorised personnel away from the work area.
11.
ALWAYS
position the (optional) safety screen directly front of the workpiece.
12.
ALWAYS
apply the load under the centre of the ram. Offset loads can
damage the ram and may cause the work piece to be ejected.
13.
ALWAYS
ensure the work piece is properly supported by the press bed.
14. When using accessories such as pressing plates, be certain they are
centered below the ram and are in full contact with the bed.
15. Parts being pressed may shatter or be ejected from the press. Always use
adequate guards and wear eye protection and protective clothing when
using this press.
16. Keep hands and fingers away from parts that may pinch or shift.
17.
NEVER
use extension tubes to increase the length of the pump handle or
foot pedal. Excessive effort can cause damage and/or accidents.
18. Wear ANSI approved impact safety goggles heavy duty work gloves.
19. Failure to heed these warnings may result in damage to the equipment, or
serious personal injury.
Summary of Contents for 7615203
Page 20: ......
