6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
1. Fit the thrust bearing to the end of
the axle.
2. Check that the direction of the
thrust bearing is with the silver
metal side facing outwards.
3. Fit the key into the slot in the shaft
and tap it into place.
4. Install the handwheel onto the
shaft, lining up the slot in the
wheel with the retaining key.
5. Secure the handwheel with the
spring washer, flat washer and
cross-headed screw supplied.
PROTECTIVE SCREEN (OPTIONAL)
A protective screen CPS50T is
available from your CLARKE dealer,
part no: 7615262.
1. Bolt the protective screen
brackets to the pressing bedplate.
Summary of Contents for 7615203
Page 20: ......
