5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PREPARATION FOR USE
LOCATING THE PRESS
Using suitable lifting equipment if required, lift the frame assembly upright and
manoeuvre it to its intended location in the workshop.
The press must be firmly secured to a firm and level floor using expansion bolts
(not supplied). Holes are provided in the feet for this purpose.
Do not locate your press where it will be exposed to the elements as harsh
weather conditions will damage the hydraulic parts.
FITTING THE WINCH
During transit, the winch is positioned
at 180
o
to its working position inside
the frame and must be correctly
mounted.
1. Turn the winch and bracket
around and re-fit to the frame
with the bolts and washers
supplied, noting that the handle
will be outside the frame for
operation.
FITTING THE HANDWHEEL
The handwheel which is used to
position the ram within the frame is
supplied loose and requires fitting.
WARNING: DUE TO THE WEIGHT OF THE PRESS, LIFTING EQUIPMENT OR THE
HELP OF AN ASSISTANT WILL BE REQUIRED DURING INSTALLATION.
Summary of Contents for 7615203
Page 20: ......
