27
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INDEXABLE CARBIDE END MILL
Part Number: 7910870
Simply insert the shank of the mill into
the spindle and screw on to the draw
bolt.
Tighten using the tommy bar in the
hole in the side of the head, into the
spindle, and spanner on the draw
bolt head.
Disassemble in the same manner as
for the drill chuck.
CLAMP SET
Part Number: 7610872
An example of how the clamp set may be used:
Select the appropriate studs and slot-
ted clamp.
Screw the ‘T’ nut on to the stud and
assemble as shown, using the appropri-
ate stepped blocks - adjust the blocks
so that the clamp is horizontal.
Summary of Contents for 7610860
Page 28: ......
