5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Don’t force the machine and use the correct power tool. It will do the job
better and safer, at the rate for which it was intended.
5. Always disconnect the machine from the power supply before carrying out
any servicing or changing of accessories.
6. Before further use of the power tool, it should be carefully checked to
determine that it will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting or other condition that may affect its operation.
7. Have defective switches repaired by your Clarke service department. Do
not use a power tool if the switch does not turn it on and off.
8. Always check for any damage or any condition that could affect the
operation of the machine. Damaged parts should be properly repaired.
9. Never remove the cover panel unless the machine is disconnected from
the power supply, and never use the machine with cover panels removed.
10. Have your tool repaired by a qualified person. This tool complies with the
relevant safety rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this may result in considerable
danger to the user.
11. Never use this product for any other purpose than that described in this
booklet.
12. Never abuse the power cable by yanking the cable to disconnect it from
the socket. Keep the cable away from heat, oil or sharp edges.
13. Guard against electric shock. Avoid body contact with earthed or
grounded surfaces.
14. If the tool should be used outdoors, use only extension cables intended for
outdoor use and marked accordingly.
15. Avoid accidental starting by making sure the power switch is off before
plugging in the power cable.
ADDITIONAL SAFETY RULES FOR DRILLS
1. Always use clamps or a drill vice bolted to the table, to hold the work. It
should never be held with bare hands.
2. Always shut off the power before leaving the machine.
CAUTION: AS WITH ALL MACHINERY, THERE ARE CERTAIN HAZARDS
INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND
CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY.
HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR
IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO
PROPERTY MAY RESULT.
Summary of Contents for 7610860
Page 28: ......
