14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Loose items supplied include the following
:
13. 1 x Hammer/brush
14. 1 x Face shield
15. 1x Spool of 0.6mm mild steel welding wire
16. 1x Spool of 0.9 mild steel welding wire
17. 1 x 0.6mm welding torch tip
18. 1 x 0.8mm welding torch tip (fitted)
19. 1 x 0.9mm welding torch tip
20. 1 x 0.6/0.8mm wire roller (fitted)
21. 1 x 0.9/1mm wire roller
22. 1 x torch wrench (for changing tips)
23. 1 x 520mm Gas hose
24. 1 x Gas bottle holder (2 pieces)
THE CONTROL FUNCTIONS
1. Power LED.
When the power is switched on at the rear of the machine the
switch will be illuminated, as will the green ‘Power On’ LED.
2. Thermal overload LED.
If the duty cycle is exceeded as a result of welding for
too long with a high current, the overload light will illuminate and the
welder will turn off. When the welder has cooled down (approx. 5 to 10
minutes), the power will be restored and welding can recommence.
3. Wire speed /current control knob.
A higher current requires a higher wire
speed. Wire speed should be set based upon the table on page 28.
4. Wire thickness selector switch.
For use with MIG/Flux welding in one of three
positions (0.6, 0.8/0.9, 1.0).
5. MIG/MMA/LIFT TIG function selector switch
for welding mode selection.
Summary of Contents for 6015601
Page 40: ......