15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLING THE WELDING SHIELD
1. The welding shield shown is
supplied flat for shipping. Fold the
sides of the shield around and clip
to the top panel.
2. Insert both the glass lens panels
into the recess inside the shield.
•
The clear glass must be fitted first
to face the outside.
3. Insert the two plastic screws and
use the plastic wingnuts to clamp
the glass panels to the shield.
•
The clear glass panel should be
replaced when it becomes badly
pitted.
4. When replacing the glass panels, only use parts supplied by CLARKE
International. The dark panel is a certified, optical glass and should not be
exchanged for any other type.
5. Secure the handle in
position using the plastic
nuts provided.
•
The handle will be
mounted on the inside of the
shield.
Summary of Contents for 6015601
Page 40: ......
