11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE AND MAINTENANCE
BEFORE STARTING WORK
Inspect the power cable and ensure it is free from damage and is not in
danger of being damaged by vehicles, equipment or other operations taking
place on the work site.
AFTER USE
It is essential that the machine is hosed down thoroughly with clean water,
being sure to remove all traces of cement mix especially from around the
mixing blades, Take care to prevent water from entering the motor housing
and if necessary, wrap a polythene sheet or bag over it during cleaning.
PERIODICALLY
After extensive use, inspect the paintwork and remove any rust that may be
apparent before touching up where necessary with a rust resistant paint.
STORAGE
The stand components can be stored separately after removing the short R-
clips and separating the legs from the stand connector. Store the pins and
clips in their usual holes in the stand connector.
The wheels can still be used for mobility. Always store the mixer in a dry place
out of reach of children.
Through the purchase of this product, the customer is taking on the
obligation to deal with the Waste Electrical/Electronic Equipment
(WEEE) in accordance with the WEEE regulations in relation to the
treatment, recycling/recovery and environmentally sound disposal
of WEEE.
If disposing of this product or any broken parts, do not dispose of with general
waste. It must be disposed of according to the laws governing Waste
Electrical and Electronic equipment at a recognized disposal facility.
CAUTION: OWING TO THE WEIGHT OF THE MACHINE, TWO PEOPLE WILL
BE REQUIRED TO LAY THE MIXER DOWN AND REMOVE IT FROM THE
STAND.
