7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
1. Bolt the rear supports to the main
frame using the first pair of nuts &
bolts supplied.
• Do not fully tighten at this
stage.
2. Insert the left and right handlebars
into the main frame brackets.
3. Connect the tie bar to the two
handlebars and secure tie bar
with nuts/washers supplied.
4. Bolt the handlebars to the main
frame using the second pair of
bolts/washers/dome nuts
supplied.
5. Tighten all fastenings using the
spanner supplied.
6. Tip the assembly over so that it
stand on the handles and rear
supports.
7. Slide the wheels onto the axles
and secure by driving in the wheel
bungs supplied using a hammer or
mallet.
