Clarke 195TEC, Operating & Maintenance Instructions

Page: 14 / 32

15
ELECTRICAL CONNECTIONS
WARNING: THIS MACHINE MUST BE EARTHED.
This welder must be connected to a 230 volt (50Hz) supply, having a rated capac-
ity of greater than 13 amps.
A 13 Amp (BS1363) plug is not suitable for this device.
Connect the three core mains lead to a suitably fused supply through an isolator
or heavy duty plug.
I MPORTANT: The wires in the mains lead are coloured in accordance
with the following colour code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
• Connect GREEN & YELLOW coloured cord to plug terminal marked with a
letter “E” or Earth symbol ‘ ’.
• Connect BROWN coloured cord to plug terminal marked letter “L”
• Connect BLUE coloured cord to plug terminal marked letter “N”
We strongly recommend that this machine is connected to the mains supply
through a Residual Current Device.
IMPORTANT: If in doubt, consult a qualified electrician. Do not attempt any electri-
cal repairs yourself.