Clark S20 D, Operator'S Manual

Page: 91 / 170

Operator Controls 3-53
Section 3. Operator Compartment and Controls
Truck Data and Capacity Plate
1. Truck model number
or registered name.
2. Truck serial number -
An identification
number assigned to
this particular truck
and should be used
when requesting
information or order-
ing service parts for
this truck from your
authorized CLARK dealer.
The serial number is also stamped on the frame.
3. Attachment description (if any installed) - The user must see that
the truck is marked to identify the attachment(s), including the
weight of the truck/attachment combination and truck capacity
with the attachment.
4. Capacity rating, load center, and lifting height data - Shows the
maximum load capacity of this truck with relation to load centers
and fork heights (see diagram on plate). Personal injury and
damage to the truck can occur if these capacities are exceeded.
Do not exceed the maximum capacity specified.
5. Truck weight - The weight of the truck without a load on the
forks. This weight plus the weight of the load must be consid-
ered when operating on elevators, elevated floors, etc. to be
sure they are safe.
CAUTION
!
When attachments are added or if the truck is modified,
the capacity of the truck may be affected. Contact your
authorized CLARK dealer for a new nameplate showing
the revised capacity.
IMPORTANT
OSHA and international standards requires prior written
approval from the manufacturer before any modifications
affecting capacity or safety may be made.
1
2
3
4
5