Clark S20 D, Operator'S Manual

Page: 66 / 170

3-28 Display
(2) Decrease Shift Shock
Delays transmission direction change shift until set speed. This is to
reduce impact on the drive-line that occurs during rapid reverse to
forward (and vice-versa) shifting. (The default is 25 km/h.)
• The setting can be changed between 1 and 25 km/h in increments
of 1 km/h.
• Example: When the fork truck travels forward at speed of 10 km/h
with a setting of 8 km/h, and the direction lever is shifted from for-
ward to reverse direction, the speed of the truck is reduced to 8
km/h before the direction change shift occurs.
Error Codes
Errors of individual controller
are displayed.
Once an error takes place,
specifics of the error are displayed
as shown on the figure to the right.
Check the specifics of error by
pressing Minus (-) button on the
right of the instrument panel as
follows :
• Setup path: Driver Menu Mode (or Service Menu Mode),
ALARM LOGBOOK