Clark S20 D, Operator'S Manual

Page: 65 / 170

Display 3-27
Section 3. Operator Compartment and Controls
Rear Camera Function Setup (optional)
You can set the rear camera function
to ON or OFF. A password is
required, contact your dealer.
Images transmitted from the rear
camera are displayed on the
instrument panel only when the gear
lever is shifted to the forward position
while the camera is kept turned on.
• Setup path: Service Menu Mode,
SETUP
→
REAR CAMERA
Auto Parking Setup
When the driver leaves the seat (Seat switch open) at forklift speed
of 0 km/h, the parking brake automatically applies. If the Seat switch
or Seatbelt opens at forklift speed more than 0 km/h, the gear lever
shifts to neutral position, and the parking brake automatically applies.
A password is required, contact your dealer.
CAUTION
!
Make sure parking functions work correctly when you
leave the truck.
(1) Anti Roll Back (OFF by default)
(for the forklift trucks mounted with Isuzu, PSI and Ford engines)
Auto parking brake applying function
is set for preventing slipping of the
forklift truck while traveling on gradient.
(This function is not available on
Yanmar engine because the engine
has no ECU.)
• The parking brake applies when
speed is reduced to 0 km/h, when
releasing the accelerator and
pushing the brake pedal while the forklift truck is on a gradient of
7% or more.
REAR CAMERA
REAR CAMERA OFF
AUTO PARKING
ANTI ROLL BACK
DECREASE SHIFT SHOCK
PARKING BRAKE COUNTER
OFF
25
300