Clark HWXE 30, Operator'S Manual

Page: 41 / 88

3.9
Know Your Truck
Hydraulic system
• Integrated motor-pump-reservoir assembly features a control
valve and pressure relief valve for controlled lowering and system
overload protection.
• Closed system reduces contamination.
• Piston type lift cylinder is vertically mounted and allows for fork
adjustment.
Frame and Forks
• Formed steel plate with bar steel reinforcements.
• Square section solid steel pull rods.
• Elevating bracket with three lug mounting design.
• Lift linkage pivot points are easily greasable.
• Lift linkage provides 6" of lift.
• Spring-loaded stability casters.
Standard Equipment
• Standard features include: either ZAPI ACE-2 500A (HWXE) or
ACE-2 400 A (PWXE) Control System, ZAPI MDI-CAN display
battery indicator, 6" lift height, horn, key switch, 24-volt electrical
system, cushion rubber drive tire, polycarbonate load wheels, 7"
or 13.6" wide battery compartment, SB-175A power connector,
high-visibility CLARK green with black finish.
• Additional HWXE features include: operator platform with rubber
molded pad, operator comfort knee pads, and operator hand rail
with center mounted control buttons.
Optional Equipment
• Optional equipment includes: coast control (HWXE only), load
backrests, polyurethane drive tire, battery compartment rollers, and
right hand exit gate, "EE" electrical system, cold storage protection,
corrosion protection and dual load wheels.
• Fork options include: 22" fork width and 48", 60", 72", and 96"
standard fork lengths. Also available are first-opening second pallet
84", 93", and 96" extended tip forks.