Clark HWXE 30, Operator'S Manual

Page: 55 / 88

4.9
Operating Your Truck
Dash Display
Alarm Light
Hour Meter
Speed Reduction
Battery Charge
Alarms
Maintenance Alarm
The dash display shows useful information to the operator, including the
hour meter, when speed reduction is applied, scheduled maintenance alarm,
fault codes, and the battery charge level. The alarm light is a red LED that
will blink when an alarm is present.
• Hour Meter: amount of time (in hours) that the truck's traction
controller has been in use.
•
Speed Reduction:
when this symbol (turtle) appears, the maxi-
mum speed and acceleration of the truck has been reduced to their
programmed settings. This function is normally OFF.
• Maintenance Alarm: when this symbol (wrench) appears, then either
a planned maintenance or alarm (fault) code has been triggered.
• Alarms: displays any alarm (fault) codes that are triggered due to
malfunction.
• Battery Charge: indicates the level of remaining charge, each
section represents 10% of total remaining battery capacity. When
the battery charge reaches LOW, an alarm is triggered and truck
function is reduced (limp mode).