background image

53

VZ509A

English

Owner

’s ma

nua

l

DVD Player

Problem

Cause

Measure

Disc cannot be 
loaded.

Another disc is already 
loaded.

Eject the disc before loading the new one.

There is a foreign matter 
already in place.

Eject the foreign matter forcibly.

Sound skips or is 
noisy.

Disc is dirty.

Clean the disc with a soft cloth.

Disc is heavily scratched or 
warped.

Replace with a disc with no scratches.

MP3/WMA/AAC files are 
not encoded properly.

Use MP3/WMA/AAC files encoded properly.

Sound is bad directly 
after power is turned 
on.

Water droplets may form 
on the internal lens when 
the car is parked in a humid 
place.

Let dry for about 1 hour with the power on.

The image is not 
displayed.

The parking brake is not 
engaged.

Check that the parking brake is engaged.

Disc cannot be 
played with the 
display “

Parental 

Violation

” shown.

The view is limited.

Release the view limitation or change the parental 
level.
See the subsection “Setting up the parental level” 
(page 25).

Disc cannot be 
played.

File system is not correct.

Use ISO9660 level 1/2, Romeo, Joliet, or Apple 
ISO file system for CD-R/RW, or UDF for DVD±R/
RW.

The color of the 
display is light or a 
shade of color is not 
good.

The color is not adjusted 
adequately.

Check that the Bright, Color, Contrast, and Hue 
are adjusted properly.

Summary of Contents for VZ509




































































Reviews: