Clarion VXZ756, Owner'S Manual

Page: 39 / 51

English
280-8177-00
VXZ756
39
Changing Initial Settings such as Menu Language, etc.
6. Press the [ ENT ] button.
Adjusting the dynamic range
This function allows you to adjust the dynamic
range, the ratio of the loudest sounds to the
quietest sounds.
∗
The factory default setting is “ MAX ”.
1. Following the steps 1 to 3 in “ Selecting the
monitor menu ”, select “ DRC ” from “ AUDIO
SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select the setting.
You can select the dynamic range from
“
MIN ”, “ STD ”, or “ MAX ”.
4. Press the [ ENT ] button.
Setting the Dolby Pro Logic
Decode processing
You can set whether or not 2-channel source is
processed using Dolby Pro Logic Decode.
∗
The factory default setting is “ ON ”.
1. Following the steps 1 to 3 in “ Selecting the
monitor menu ”, select “ Dolby PL ” from
“ AUDIO SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ ON ” or
“ OFF ”.
4. Press the [ ENT ] button.
Setting the down mix
∗
This function can be operated only when the
speakers other than FRONT-SP are set to
“
OFF ” in “ SP-SEL ”.
This function allows you to select the method of
down-mixing when the channel format and the
output channel configuration are not in
agreement.
∗
The factory default setting is “ Lo/Ro ”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “ DOWN MIX ” from
“ AUDIO SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ Lo/Ro ” or
“ Lt/Rt ”.
“ Lo/Ro ”: Down-mixing the discrete 5-channel
master etc. to 2-channel stereo track
“
Lt/Rt ”: Writing down matrix-encoded sounds
to 2-channel stereo track
4. Press the [ ENT ] button.
+VXZ756_01-25-Eng.p65 05.3.3, 7:59 PM 39